UCC2813N-2
| Parameters | |
|---|---|
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
UCC2813N-2 Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm) .The AC/DC power converter type is Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.This AC/DC converter is suitable for operation in the range of 8.3V~12V supply voltage (Vcc/Vdd).In total, it has 8 terminations.On this ac/dc converter, there are 8 pins.The ac-dc converter has 8 pins.Through Hole is a suitable mounting point for the ac dc converters.A similar acdc converter can be searched by using the UCC2813 family.The number of outputs to run is 1 .Switching Regulator or Controllers includes the ac to dc conversions.We are setting the output current to 200mA .There is 1V voltage output from it.AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .It is important to keep this AC to DC converter set to 10V .
UCC2813N-2 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 200mA
UCC2813N-2 Applications
There are a lot of Texas Instruments UCC2813N-2 AC DC Converters applications.
- RCC SMPS
- Replaces linear transformers
- Set-top boxes
- Small off-line low voltage power supplies
- Humidifier
- Adaptors for Portable Media Player
- Standby Power Supply
- Dimmers
- Standby power supplies for TV
- LED lights
