UCC2813PW-3G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Switching Frequency | 1MHz |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813PW-3G4 Overview
With a 8-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. The pmic is packaged in Tray solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 3.6V~12V voltage are supplied and operated. Worked in an dc switcher with a -40°C~85°C TA rating. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 8 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. Other relevant dc to dc converter ics can be found by searching "UCC2813". Switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Statistically, DC regulator outputs 1V volts. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is 1MHz frequency setting on the switching controller. Switching controller is necessary to provide a voltage of 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current. 1MHz is the frequency at which this controller performs well most of the time.
UCC2813PW-3G4 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813PW-3G4 Applications
There are a lot of Texas Instruments UCC2813PW-3G4 DC to DC converter applications.
- Milling machines
- Smoke exhaust equipment
- Energy management systems
- Adjustable voltage or current linear circuits
- CNC system
- Drilling machines
- Cutting machine tools
- Various precision measuring instruments
- Medical equipment
- Hydrogen power
