UCC2813PW-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Switching Frequency | 1MHz |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813PW-5 Overview
Capsuled in the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 3.6V~12V. Suitable for work in a -40°C~85°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. 8 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. Other relevant dc to dc converter ics will be returned if you search "UCC2813". Switching converter has a total of 8 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4V. Statistically, the DC regulator outputs 1V voltage. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 1MHz Hz. Switching controller is necessary to supply a voltage of 10V. 30mA more than 30mA current should be supplied to the controller. Switching voltage regulators' nominal current supply is 500μA. At 1MHz, this controller will mostly work as expected.
UCC2813PW-5 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813PW-5 Applications
There are a lot of Texas Instruments UCC2813PW-5 DC to DC converter applications.
- Flaw detection equipment
- Remotely powered electric motors
- Magnetohydrodynamic power
- CNC system
- Experimental setup
- Shearing machines
- Computer monitoring equipment of building
- Hydraulic presses
- Computer rooms
- Drilling machines
