UCC2813PWTR-0
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Switching Frequency | 1MHz |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813PWTR-0 Overview
It comes in a 8-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 6.9V~12V voltage are supplied and operated. Worked in a -40°C~85°C TA dc switcher before. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 10V. UCC2813 can be searched for other relevant dc to dc converter ics. 8 pins are present on switching converter. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 7.5V. Statistically, the DC regulator outputs 1V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at a frequency of 1MHz. The supply voltage should be 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current. 1MHz is the frequency at which this controller performs well most of the time.
UCC2813PWTR-0 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813PWTR-0 Applications
There are a lot of Texas Instruments UCC2813PWTR-0 DC to DC converter applications.
- Grinders
- CMM
- Smoke prevention equipment
- Game consoles
- Plate bending machines
- Scientific testing
- Mobile phones
- Printing equipment
- Automatic testing equipment
- Serial communication converter
