UCC2813PWTR-0G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 7.5V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Switching Frequency | 1MHz |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813PWTR-0G4 Overview
With a 8-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's6.9V~12V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. Searching "UCC2813" will return other relevant dc to dc converter ics. In total, switching converter has 8 pins. Switching converter is a special type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 7.5V. The test statistics indicate that DC regulator outputs a voltage of 1V. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controller operates at 1MHz Hz. Switching controller is necessary to provide a voltage of 10V. There should be 30mA current exceeding 30mA supplied to the controller. In most cases, this controller will perform well at frequency 1MHz.
UCC2813PWTR-0G4 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813PWTR-0G4 Applications
There are a lot of Texas Instruments UCC2813PWTR-0G4 DC to DC converter applications.
- Constant current circuits
- Planers
- Production lines
- Adjustable voltage or current linear circuits
- Motor controller circuits
- Electrical distribution systems
- Wide-range voltage regulation circuits
- Surface processing equipment
- Current source circuits
- Printing
