UCC2813PWTR-3G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Switching Frequency | 1MHz |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813PWTR-3G4 Overview
It comes in a 8-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. 3.6V~12V is the operating voltage and supply voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. 8 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. UCC2813 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the dc dc voltage regulator's minimum input voltage be 4V. Test statistics indicate DC regulator outputs 1V voltage. If you start a project, note down the dc dc regulator's usual output current of 200mA. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. The switching controller works at a frequency of 1MHz. The supply voltage should be 10V. There should be 30mA current exceeding 30mA supplied to the controller. At 1MHz, this controller performs best.
UCC2813PWTR-3G4 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813PWTR-3G4 Applications
There are a lot of Texas Instruments UCC2813PWTR-3G4 DC to DC converter applications.
- Game consoles
- Combined machine tools
- Production lines
- Adjustable voltage or current linear circuits
- SMT equipment
- Injection molding machinery
- Smoke prevention equipment
- Sensitive electronic devices
- Serial communication converter
- Large fire protection systems
