UCC2813PWTR-4G4
| Parameters | |
|---|---|
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
UCC2813PWTR-4G4 Overview
The ac to dc converter is embedded in 8-TSSOP (0.173, 4.40mm Width) package.Tape & Reel (TR) case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As long as the supply voltage (Vcc/Vdd) is within the range of 8.3V~12V , the AC/DC converter may be used.In total, it has 8 terminations.The ac/dc converter has 8 pins.The pins of the ac-dc converter count up to 8 .Surface Mount is a suitable mounting point for the ac dc converters.Search similar acdc converters based on UCC2813 family members.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .200mA is set as the output current.Its output voltage is1V .A high efficiency can be achieved by operating at a frequency of 1MHz .It is important to keep this AC to DC converter set to 10V .
UCC2813PWTR-4G4 Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
With 8 pins
Output Current at 200mA
UCC2813PWTR-4G4 Applications
There are a lot of Texas Instruments UCC2813PWTR-4G4 AC DC Converters applications.
- Adaptors for Portable Media Player
- Adapter/Charger for Cordless Phones
- DVD players
- LED lights
- Automotive Infotainment
- Adapters
- 3.3V power supplies
- Set-top boxes
- Standby power supplies for IR
- Z-Wave
