UCC2813PWTR-5G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Pin Count | 8 |
| Output Voltage | 4V |
| Input Voltage-Nom | 10V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 200mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 1V |
| Input Voltage (Min) | 4V |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 50 % |
| Number of Output Phases | 1 |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2813PWTR-5G4 Overview
The switching controller fits in the TSSOP package and is ideal for most applications. An enclosure of Tape & Reel (TR) is used to package the PMIC. Switching can be done at 1MHz with this switching controller. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. Total pins of switching converter are 8. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 4V. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers operate at 1MHz frequencies. At least -40°C°C is recommended. At85°C, dc regulator should run. In total, the switch converters have 1 function (s). Designing voltage regulators switchings with 8 pins is one of the most important aspects of the process. At maximum frequency, the controller can switch at 1MHz. It is ideal for switching controllers with 200mA input. Normally, it outputs a value of 1V. There are 1 phases in this controller.
UCC2813PWTR-5G4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2813PWTR-5G4 Applications
There are a lot of Texas Instruments UCC2813PWTR-5G4 DC to DC converter applications.
- Computer monitoring equipment of building
- Product testing
- Balance equipment
- Post equipment
- Electric water heaters
- Electrical power transmission
- Experimental setup
- Series voltage regulation circuits
- Terrestrial set-top boxes
- Pipe bending machines
