UCC2813QDR-1Q1
| Parameters | |
|---|---|
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7.4V~12V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Nominal Input Voltage | 48V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Switching Frequency | 1MHz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.608178mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
UCC2813QDR-1Q1 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7.4V~12V. Suitable for a -40°C~125°C TJ dc switcher. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. Searching "UCC2813" will return other relevant dc to dc converter ics. Total pins of switching converter are 8. The type is a particular Switching Regulator or Controllers of switching converter. Test statistics indicate DC regulator outputs 400mV voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. Switching controller operates at 1MHz Hz. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. For nominal working status, the input voltage can be set as 48V. The nominal current supply of this the controllers dc is 500μA. At 1MHz, this controller will mostly work as expected.
UCC2813QDR-1Q1 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813QDR-1Q1 Applications
There are a lot of Texas Instruments UCC2813QDR-1Q1 DC to DC converter applications.
- Geothermal power
- Correction machines
- Fire elevators
- Machining centers
- Computer rooms
- Arc suppression circuits
- Mobile phones
- Experimental setup
- Serial communication converter
- Hydrogen power
