UCC2817DG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 250kHz |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Nominal Supply Current | 4mA |
| Input Voltage (Min) | 10.3V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2817DG4 Overview
Currently, it is available as a SOIC package.The part has other IC types such as POWER FACTOR CONTROLLER.An array of 16 terminals is located on the gadget.Pin number 16 remains the same for the component.Switching occurs at a frequency of 115kHz.16 pins form a sum.A minimum input voltage of 10.3V is required for it to function.In a way, it's a subclass of Switching Regulator or Controllers.There is a maximum voltage (Max) for its input.With a frequency of 250kHz, it can continue to operate accurately.As a result, it works in a 1.2A output current at the maximumDuring operation, it should be warmer than -40°C.In this case, the maximum operating temperature is 85°C at this point.Unless the supply voltage is 17V, it cannot be used.It is only possible to supply 12V volts to it since that is the only supply voltage that will work.
UCC2817DG4 Features
UCC2817DG4 Applications
There are a lot of Texas Instruments UCC2817DG4 PFC PMICs applications.
- Sense & Conrol
- Hot swap controller
- Engine management
- Set top boxes
- Measurement and control euipment
- HVAC (Heating, Ventilation, and Air Conditioning)
- Video equipment
- Op-amps
- Quick charge protocols
- Ethernet condition monitoring vibration sensor
