UCC2818APWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 12V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC2818 |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10.3V |
| Output Current-Max | 1.2A |
| Frequency - Switching | 6kHz~220kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4mA |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 150μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2818APWRG4 Overview
In a 16-TSSOP (0.173, 4.40mm Width) package, it is available.The packaging is Tape & Reel (TR)-shaped.It has a Surface Mount mounting type.It should operate with the voltage supply of 12V~17V.Device -40°C~85°C operates at -40°C~85°C.The part has other IC types such as POWER FACTOR CONTROLLER.On the gadget, there are several 16 terminals.Current startup state is 150μA.The component's pin number remains 16.UCC2818 is the device's best feature.The switching frequency is 6kHz~220kHz.There are 16 pins in this board, which make up its sum.Depending on the input voltage, it can operate at a minimum of 10.3V volts.It's a subclass of Switching Regulator or Controllers in a way.There is a voltage (Max) input to this device.In terms of output current, it works at the maximum in 1.2AA 12V volt supply is always used to power the component.There must be no more than 4mA amps in a supply, if isup is the maximum supply current.
UCC2818APWRG4 Features
UCC2818APWRG4 Applications
There are a lot of Texas Instruments UCC2818APWRG4 PFC PMICs applications.
- SoC
- Car wiper
- Engine cooling fan
- Alternators
- Pressure sensor
- Home electric appliance
- Production line
- Low Noise Instrumentation
- Vibration sensor
- Dashboards
