UCC2819ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 250kHz |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2819ADG4 Overview
There is a SOIC package that comes with it.The part has other IC types such as POWER FACTOR CONTROLLER.Several 16 terminals are present on the gadget.Pin number 16 remains unchanged.There is a frequency of switching called 115kHz.16 pins are arranged in a sum.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.A frequency of 250kHz allows it to continue operating with a good level of accuracy.There is a mountain on the other side of it called Mount Surface Mount.As far as output current is concerned, it works in 1.2A12V volts always power the component.Isup, or the maximum supply current, shall not exceed 6mA.Supply 12V is the device's supply.During operation, it should be warmer than -40°C.There is a maximum operating temperature of 85°C at this point in time.Only a 17V supply voltage will work with it.A voltage of 10.8V volts is the only supply voltage it can work with.
UCC2819ADG4 Features
UCC2819ADG4 Applications
There are a lot of Texas Instruments UCC2819ADG4 PFC PMICs applications.
- PLL (Phase-Locked Loop)
- Subsequent
- Motorcycle
- Electronic notebook
- EPS (Electric Power Steering)
- Video equipment
- Position detection
- Workstations
- Temperature monitoring
- 4WD transfercase
