UCC2819APWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 16 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 250kHz |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC2819APWG4 Overview
There is a TSSOP package that comes with it.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER type.Several 16 terminals are present on the gadget.Pin 16 remains the component's pin number.Switching occurs at a frequency of 115kHz.There are 16 pins in this board, which make up its sum.It's like a subclass of Switching Regulator or Controllers.This device can continue to function accurately with a frequency of 250kHz.At most, it works with 1.2A output currentA 12V volt supply is always used to power the component.There should be a limit on ISUP, the maximum supply current, so that it does not exceed 6mA.As for the supplies of the device, they are 12V.As soon as it is turned on, it should be warmer than -40°C.85°C is the maximum operating temperature at this point.Voltages higher than 17V are required for it to work.It can only work with a supply voltage of 10.8V volts.
UCC2819APWG4 Features
UCC2819APWG4 Applications
There are a lot of Texas Instruments UCC2819APWG4 PFC PMICs applications.
- EPS (Electric Power Steering)
- IBIS model
- Low-voltage microprocessor power supplies
- SoC
- Medical Applications: Diagnostics and Imaging
- Smartcard
- Low Noise Instrumentation
- Video equipment
- Camera
- Transmission
