UCC2819N
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 10.8V~17V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 250kHz |
| Base Part Number | UCC2819 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Nominal Supply Current | 4mA |
| Input Voltage (Min) | 10.3V |
| Input Voltage (Max) | 17V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 150μA |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
UCC2819N Overview
In a 16-DIP (0.300, 7.62mm) package, it is available.A Tube-package is used.Through Hole is the device's mounting type.With a voltage supply of 10.8V~17V, it should work.Device -40°C~85°C is set to operate.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.Several 16 terminals are present on the gadget.There is a current of 150μA at startup.There is no change to the pin number of the component.There are a number of UCC2819s in the device's best feature.In this case, it has a sum of 16 pins.Minimum input voltage 10.3V is needed to operate it.Switching Regulator or Controllers is a subclass of it in some ways.17V is its maximum input voltage (Max).With a frequency of 250kHz, it can continue to operate with good accuracy.12V volts always power the component.A supply current of more than 6mA shall not exceed ISUP.In the world of 2 outputs, a variety of formats are available.
UCC2819N Features
UCC2819N Applications
There are a lot of Texas Instruments UCC2819N PFC PMICs applications.
- Decoupling circuit
- Motor controllers
- Aging system
- Ultrasound
- IBIS model
- Power tool motor control
- Main inverter
- Digital audio player
- Multiple-power supply system
- Timing and clock ICs
