UCC28220D

16 Terminals 8.4V~14.5V 16-Pin UCC28220 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 200kHz~2MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28220D
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 301
Description: 16 Terminals 8.4V~14.5V 16-Pin UCC28220 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 200kHz~2MHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~105°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	2MHz
Base Part Number	UCC28220
Function	Step-Up/Step-Down
Number of Outputs	2
Output Voltage	3.45V
Output Type	Transistor Driver
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Power Dissipation	650mW
Output Current	10mA
Voltage - Supply (Vcc/Vdd)	8.4V~14.5V
Quiescent Current	3mA
Control Features	Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	200kHz~2MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	10ns
Supply Current-Max (Isup)	6mA
Synchronous Rectifier	No
Fall Time (Typ)	10 ns
Nominal Input Voltage	48V
Switcher Configuration	PUSH-PULL
Max Duty Cycle	90 %
Duty Cycle (Max)	75%
Output Phases	1
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC28220D Overview

Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 2 numbers. There is a Tube solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 8.4V~14.5V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~105°C TA. In this switching controller, the switch can be set to 200kHz~2MHz. A generalization of dc dc regulator can be made using Surface Mount. Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 16 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. 12V nominal DC switcher's voltage input. In addition to "UCC28220", there are other relevant dc to dc converter ics you can find. In total, switching converter has 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 3.45V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 10mA, so you should note it down when starting a new project. A duty cycle set at 90 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controller operates at 2MHz Hz. DC switchings that are dormant use 3mA. It is possible to set the input voltage to 48V for nominal working status. The supply voltage should be 12V. There should be 6mA more than 6mA amps of current supplied to the controller.