UCC28220PWR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Frequency | 2MHz |
| Base Part Number | UCC28220 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~14.5V |
| Control Features | Ramp, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Supply Current-Max (Isup) | 6mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 48V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 75% |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
UCC28220PWR Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. 2 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 8.4V~14.5V. Work well in dc switchers with a -40°C~105°C TA. Switching can be done at 200kHz~2MHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Ramp, Soft Start which allows efficient switching control. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 16. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics can be found by searching "UCC28220". 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 400mV. The dc dc regulator's usual output current is 10mA, which should be noted down when you start a project. voltage regulator dc to dcs with a 90 % duty cycle are designed to be reliable when powered on and powered off. 2MHz is the frequency of the switching controller. It is possible to set the input voltage as 48V for nominal working statuses. The supply voltage should be 12V. You should not supply more current than 6mA to the controller.
UCC28220PWR Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
Frequency: 2MHz
UCC28220PWR Applications
There are a lot of Texas Instruments UCC28220PWR DC to DC converter applications.
- Motor controller circuits
- Automatic plug-in machines
- Program control systems
- Access control systems
- Product testing
- Thermal power
- Large fire protection systems
- Smart grid
- Wide-range voltage regulation circuits
- Digital video recorders
