UCC28220QDRQ1

16 Terminals 8V~14.5V 16-Pin UCC28220 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 200kHz~2MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28220QDRQ1
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 853
Description: 16 Terminals 8V~14.5V 16-Pin UCC28220 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 200kHz~2MHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	100A
Voltage - Supply (Vcc/Vdd)	8V~14.5V
Control Features	Ramp, Soft Start
Input Voltage (Min)	8V
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	200kHz~2MHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	10ns
Supply Current-Max (Isup)	6mA
Synchronous Rectifier	No
Switcher Configuration	SINGLE
Max Frequency	2MHz
Output Voltage-Max	3.45V
Max Duty Cycle	90 %
Duty Cycle (Max)	75%
Output Phases	1
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Base Part Number	UCC28220
Function	Step-Up/Step-Down
Number of Outputs	2
Output Voltage	3.3V
Output Type	Transistor Driver

UCC28220QDRQ1 Overview

It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. There is sufficient capacity to generate switching controller for outputs 2. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 8V~14.5V are the dc control's supply voltage and operating voltage, respectively. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 200kHz~2MHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Ramp, Soft Start which allows efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. UCC28220 can be used to locate other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. 8V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 3.3V. In most cases, the output current of the dc dc regulator will be 100A, so note that when you start the project. A duty cycle set at 90 % ensures voltage regulator dc to dc reliability during power-on and power-off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulators have a maximum frequency of 2MHz. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. The supply voltage must be 12V. It is not recommended to supply more current to the controller than 6mA. Tests are conducted at 3.45V to determine the dc controller's highest voltage output.