UCC28230DRNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Weight | 16.300976mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | UCC28230 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 4 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.5mA |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 7V~17V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 60V |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 600μm |
| Length | 2mm |
| Width | 3mm |
| Thickness | 550μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28230DRNT Overview
The switching controller fits in the 12-UFDFN Exposed Pad package and is ideal for most applications. The dc motor controller is adquate to generate for 4 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. 7V~17V is the supply voltage and the operating voltage of the dc control. Suitable for a -55°C~125°C TJ dc switcher. With this switching controller, you can switch at 100kHz~550kHz. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. An array of 12 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "UCC28230" to find other relevant dc to dc converter ics. The switching converter has a total of 12 pins. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, DC regulator outputs 5V volts. The dc dc regulator's usual output current is 10mA, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. A frequency of 1MHz is set for the switching controller. A nominal working status is achieved when the input voltage is set to 60V. The supply voltage must be 12V. 2.5mA volts is the supply current.
UCC28230DRNT Features
Transistor Driver Outputs
Switching Frequency: 100kHz~550kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC28230DRNT Applications
There are a lot of Texas Instruments UCC28230DRNT DC to DC converter applications.
- Energy management systems
- Remotely powered electric motors
- seismic instrument power circuits
- USB circuits
- Precision electronic equipment
- Series voltage regulation circuits
- Industrial robots
- Grinders
- Industrial controllers
- Production lines
