UCC28230PW
| Parameters | |
|---|---|
| Max Duty Cycle | 100 % |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.910309mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC28230 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 4 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 7V~17V |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2.5mA |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 60V |
UCC28230PW Overview
In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 4 output generation. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 7V~17V are the dc control's supply voltage and operating voltage, respectively. Worked in a -55°C~125°C TJ dc switcher before. It can switch at 100kHz~550kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. Various 14 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Search for "UCC28230" to find other relevant dc to dc converter ics. In total, switching converter has 14 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5V voltage. In most cases, the dc dc regulator's output current is 10mA. This information should be noted when you begin working with the component. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. Switching controllers operate at 1MHz frequencies. You can set the input voltage to 60V for nominal working status. This voltage controller requires a supply voltage of 12V. You should not supply more current than 2.5mA to the controller.
UCC28230PW Features
Transistor Driver Outputs
Switching Frequency: 100kHz~550kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
UCC28230PW Applications
There are a lot of Texas Instruments UCC28230PW DC to DC converter applications.
- Low output voltage switching power supply circuits
- SMT equipment
- Geothermal power
- Power supplies of electronic gadgets
- Household control circuits
- Cutting machine tools
- Various precision measuring instruments
- Automatic testing equipment
- Pipe bending machines
- Photovoltaic power
