UCC28231DRNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Weight | 16.300976mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | UCC28231 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 4 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7V~17V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 7V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.2A |
| Frequency - Switching | 100kHz~550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2.5mA |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 600μm |
| Length | 2mm |
| Width | 3mm |
| Thickness | 550μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28231DRNR Overview
Capsuled in the 12-UFDFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 4 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 7V~17V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -55°C~125°C TJ. A switching controller such as this can switch at a value of 100kHz~550kHz . The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . Different dc switching's functions can be applied to 12 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics can be found by searching "UCC28231". Switching converter has a total of 12 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 7V. Based on the test statistics, DC regulator outputs voltage 5V. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. There is a maximum frequency of 1MHz on this dc regulators. 0.2A is the largest value switching converter outputs. The supply voltage must be 12V. There should be 2.5mA current exceeding 2.5mA supplied to the controller.
UCC28231DRNR Features
Transistor Driver Outputs
Switching Frequency: 100kHz~550kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
UCC28231DRNR Applications
There are a lot of Texas Instruments UCC28231DRNR DC to DC converter applications.
- Hydrogen power
- Gear/thread machining machines
- Plate bending machines
- Mobile phones
- Radio equipment
- Industrial controllers
- Automation technology
- Printing equipment
- PSRR circuits
- Pipe bending machines
