UCC28251RGPT

20 Terminals 4.7V~17V 20-Pin UCC28251 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 42kHz~945kHz PWM Signal

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC28251RGPT
Package: 20-VFQFN Exposed Pad
Datasheet: -
Stock: 347
Description: 20 Terminals 4.7V~17V 20-Pin UCC28251 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 42kHz~945kHz PWM Signal (Kg)

Details

Tags

Parameters
Thickness	930μm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-VFQFN Exposed Pad
Number of Pins	20
Weight	69.994973mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Terminal Pitch	0.5mm
Frequency	945kHz
Base Part Number	UCC28251
Function	Step-Up/Step-Down
Number of Outputs	2
Output Voltage	3.25V
Output Type	PWM Signal
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	2mA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	4.7V~17V
Max Supply Current	275μA
Control Features	Current Limit, Enable, Frequency Control, Ramp, Soft Start
Topology	Full-Bridge, Half-Bridge, Push-Pull
Control Mode	CURRENT/VOLTAGE-MODE
Frequency - Switching	42kHz~945kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	8ns
Synchronous Rectifier	Yes
Fall Time (Typ)	8 ns
Nominal Input Voltage	20V
Max Duty Cycle	100 %
Clock Sync	No
Duty Cycle	100 %
Output Phases	1
Height	1mm
Length	4mm
Width	4mm

UCC28251RGPT Overview

Capsuled in the 20-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. For outputs of 2, this dc motor controller is suitable. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With PWM Signal dc switching's output (s), it is able to handle it. DC control operates at 4.7V~17V volts and has 4.7V~17V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. With this switching controller, you can switch at 42kHz~945kHz. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position QUAD . Various 20 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "UCC28251". Pins number 20 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 3.25V. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is 945kHz frequency setting on the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 12V. 20V is the nominal working voltage. Switching controller is necessary to provide a voltage of 12V. The supply current of the voltage controller is 2mA. The component might suffer damage if the current exceeds 275μA.

UCC28251RGPT Features

PWM Signal Outputs
Switching Frequency: 42kHz~945kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 945kHz