UCC28500DWG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Nominal Supply Current | 4mA |
| Input Voltage (Min) | 10.3V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC28500DWG4 Overview
SOIC packages are available.As well as POWER FACTOR CONTROLLER WITH POST REGULATOR ICs, the part has other IC types.An array of 20 terminals is located on the gadget.Pin number 20 remains unchanged.There is a switching frequency of 115kHz.There are a total of 20 pins on it.There is a minimum input voltage of 10.3V that can make it function properly.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.The output voltage (Max) of this device is 15V.With a frequency of 200kHz, it can continue to operate with good accuracy as long as it has a frequency of 200kHz.As a result, it works in a 1.2A output current at the maximumAmong the other features are CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE, for example.As soon as it is turned on, it should be warmer than -40°C.85°C is the maximum operating temperature at this point.Only a 18V supply voltage will work with it.
UCC28500DWG4 Features
UCC28500DWG4 Applications
There are a lot of Texas Instruments UCC28500DWG4 PFC PMICs applications.
- Workstations
- Raspberry Pi
- Embedded systems
- Fans
- Peripheral devices
- Electronic modules
- Servers
- Personal communication device
- Laboratory
- Post DC-DC regulation
