UCC28502DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Base Part Number | UCC28502 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.3V |
| Output Current-Max | 1.2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 150μA |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28502DWG4 Overview
The package is 20-SOIC (0.295, 7.50mm Width)-shaped.The packaging is Tube-shaped.It has a Surface Mount mounting type.With a voltage supply of 9.7V~18V, it should work.Device -40°C~85°C operates at -40°C~85°C.POWER FACTOR CONTROLLER WITH POST REGULATOR is another IC type on the part.The gadget has several 20 terminals.The startup current is 150μA.There is no change to the pin number of the component.UCC28502 is the device's best feature.Switching frequency 100kHz is what determines the switching frequency.There are a total of 20 pins on it.With a minimum input voltage of 10.3V, it is capable of functioning.I suppose it can be considered a subclass of Switching Regulator or Controllers.Its input voltage (Max) is 15V.As long as the frequency is kept constant at 200kHz, it is possible to continue to operate with good accuracy.Located on Mount Surface Mount, it is a part of the mountain range.The maximum output current it can deliver is 1.2ACAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE is one of the other features available.
UCC28502DWG4 Features
UCC28502DWG4 Applications
There are a lot of Texas Instruments UCC28502DWG4 PFC PMICs applications.
- PLL (Phase-Locked Loop)
- Fuel injector
- Temperature monitoring
- Car infotainment
- VCO (Voltage-Controlled Oscillator)
- Automotive applications
- Low-voltage microprocessor power supplies
- Engine management
- Position detection
- Sense & Conrol
