UCC28502NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC28502 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.3V |
| Output Current-Max | 1.2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 150μA |
| Height Seated (Max) | 5.08mm |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
UCC28502NG4 Overview
In a 20-DIP (0.300, 7.62mm) package, it is available.The package is designed in the Tube shape.Depending on the device, the mounting type will either be Through Hole or C.In order to operate, it should be plugged into 9.7V~18V's voltage supply.A setting of -40°C~85°C has been set on the device.Other IC types exist, such as POWER FACTOR CONTROLLER WITH POST REGULATOR.The gadget has a number of 20 terminals on the back of it.Startup current is 150μA.There is no change to the pin number of the component.One of the device's best parts is that it has a number of UCC28502 on it.In this case, 100kHz is the switching frequency.The 20 pins are summed up.Minimum input voltage 10.3V is needed to operate it.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.The input voltage of the device (Max) is 15V.Located on mount Through Hole, it forms part of the mountain range.At the most, it works with 1.2A output currentThere are other features such as CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE to name a few.
UCC28502NG4 Features
UCC28502NG4 Applications
There are a lot of Texas Instruments UCC28502NG4 PFC PMICs applications.
- Op-amps
- Peripheral devices
- Low Noise Instrumentation
- Blower
- HMI (Human-Machine Interface)
- DSP power
- Portable medical devices
- Hot swap controller
- UPS (Uninterruptible Power Supply )
- SMPS (Switching-Mode Power Supply)
