UCC28503DWG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 200kHz |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Nominal Supply Current | 4mA |
| Input Voltage (Min) | 10.3V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC28503DWG4 Overview
This product comes in a SOIC package.There are other IC types in this part, such as POWER FACTOR CONTROLLER WITH POST REGULATOR.The gadget has a number of 20 terminals on the back of it.Pin number 20 remains the same for the component.The switching frequency is 115kHz.There are 20 pins in this board, which make up its sum.A minimum input voltage of 10.3V is required for it to function.It's like a subclass of Switching Regulator or Controllers.15V is its input voltage (Max).A frequency of 200kHz allows it to continue operating with a good level of accuracy.As far as output current is concerned, it works in 1.2ATo name a few, there is CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE.In order for it to perform properly, it should be warmer than -40°C when it is operating.In this case, the maximum operating temperature is 85°C at this point.It requires a 18V-voltage supply to operate.
UCC28503DWG4 Features
UCC28503DWG4 Applications
There are a lot of Texas Instruments UCC28503DWG4 PFC PMICs applications.
- Transmission
- Servers
- PLL (Phase-Locked Loop)
- Power tool motor control
- Noise filters
- Low Noise Instrumentation
- Light networks
- Pressure sensor
- Measurement and control euipment
- Fuel injector
