UCC28510DWG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.8V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3.5A |
| Frequency - Switching | 230kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 2.65mm |
| Length | 12.825mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC28510DWG4 Overview
Packaged in a SOIC format.There are other IC types in this part, such as POWER FACTOR CONTROLLER WITH POST REGULATOR.On the gadget, there are several 20 terminals.There is no change to the pin number of the component.There is a switching frequency of 230kHz.In this case, it has a sum of 20 pins.Minimum input voltage 10.8V is needed to operate it.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.15V is the maximum input voltage (Max) of this device.An accurate operation is possible with 500kHz as the frequency.At most, it works on 3.5A output currentAs soon as it begins to operate, it should be warmer than -40°C.It is at this point that the maximum operating temperature is 105°C.Voltages higher than 18V are required for it to work.
UCC28510DWG4 Features
UCC28510DWG4 Applications
There are a lot of Texas Instruments UCC28510DWG4 PFC PMICs applications.
- TVS diodes
- Car lighting
- Telematics
- Clock power supplies
- Pressure sensor
- Arduino servo control
- SMPS (Switching-Mode Power Supply)
- Industrial equipment
- Blower
- ADAS (Advanced Driver-Assistance System)
