UCC28512DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PEAK CURRENT MODE ALSO AVAILABLE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Base Part Number | UCC28512 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.8V |
| Output Current-Max | 3.5A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4mA |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 100μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28512DWR Overview
As far as packaging is concerned, it comes in a 20-SOIC (0.295, 7.50mm Width) package.As you can see, it's packaged in a Tape & Reel (TR)-shape.There is a Surface Mount mounting type on the device.The voltage supply of 9.7V~18V should be used to operate it.A setting of -40°C~105°C has been set on the device.As well as POWER FACTOR CONTROLLER WITH POST REGULATOR ICs, the part has other IC types.The gadget comes with several 20 terminals.There is a current of 100μA at startup.It should be noted that the pin number of this component remains at 20.Best part of the device has a UCC28512 in it.Switching frequency 200kHz is what determines the switching frequency.In this case, it has a sum of 20 pins.The system can operate with a minimum input voltage of 10.8V.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.There is a maximum voltage (Max) for its input.Keeping its frequency at 500kHz allows it to maintain good accuracy.In terms of output current, it works at the maximum in 3.5AThere is always a 12V-volt supply powering the component.Isup, the maximum supply current, shall not exceed 4mA.Other features include PEAK CURRENT MODE ALSO AVAILABLE, for example.
UCC28512DWR Features
UCC28512DWR Applications
There are a lot of Texas Instruments UCC28512DWR PFC PMICs applications.
- Engine management
- Power generator plants
- Signal chain
- IBIS model
- Laboratory
- LED lighting
- Subsequent
- Motor controllers
- EPS (Electric Power Steering)
- CPU power supply
