UCC28513DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PEAK CURRENT MODE ALSO AVAILABLE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Base Part Number | UCC28513 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.8V |
| Output Current-Max | 3.5A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4mA |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 100μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28513DWR Overview
A 20-SOIC (0.295, 7.50mm Width) package contains it.The packaging is Tape & Reel (TR)-shaped.The device's mounting type is Surface Mount.The voltage supply of 9.7V~18V should be used.Device -40°C~105°C operates at -40°C~105°C.POWER FACTOR CONTROLLER WITH POST REGULATOR is another IC type on the part.A number of 20 terminals can be found on the device.There is a current of 100μA at startup.Pin number 20 remains the same for the component.This device has a number of UCC28513 in its best part.There is a frequency of switching called 200kHz.It has a sum of 20 pins.Minimum input voltage is 10.8V, and it can function on this voltage.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.There is a voltage (Max) input to this device.With a frequency of 500kHz, it will continue to function with a good degree of accuracy for a long time to come.As a result, it works in a 3.5A output current at the maximumA 12V-volt supply is always used to power the component.Isup, the maximum supply current, shall not be more than 4mA.There are other features such as PEAK CURRENT MODE ALSO AVAILABLE to name a few.
UCC28513DWR Features
UCC28513DWR Applications
There are a lot of Texas Instruments UCC28513DWR PFC PMICs applications.
- Signal chain
- Camera
- IO devices
- Voltage tracker protection circuits
- Sense & Conrol
- Low Noise Instrumentation
- Timing and clock ICs
- Ultrasound
- TVS diodes
- Raspberry Pi
