UCC28513DWRG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 500kHz |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Input Voltage (Min) | 10.8V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 3.5A |
| Frequency - Switching | 230kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 2.65mm |
| Length | 12.825mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC28513DWRG4 Overview
Packaged in a SOIC format.A Tape & Reel (TR)-package is used.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER WITH POST REGULATOR type.The gadget has a number of 20 terminals on the back of it.There is no change to the pin number of the component.There is a frequency 230kHz associated with switching.There are a total of 20 pins on it.Depending on the input voltage, it can operate at a minimum of 10.8V volts.Switching Regulator or Controllers is a subclass of it in some ways.15V is its maximum input voltage (Max).With a frequency of 500kHz, it can continue to operate accurately.At most, it works on 3.5A output current12V volts always power the component.A temperature of -40°C should be higher than the temperature of W when it is operating.This is the maximum operating temperature.Voltages higher than 18V are required for it to work.
UCC28513DWRG4 Features
UCC28513DWRG4 Applications
There are a lot of Texas Instruments UCC28513DWRG4 PFC PMICs applications.
- Camera
- Clock power supplies
- Voltage tracker protection circuits
- Signal chain
- RF (Radio Frequency)
- SoC
- Car window lift
- Power tool motor control
- Automotive applications
- Bypass circuit
