UCC28514DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PEAK CURRENT MODE ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 500kHz |
| Base Part Number | UCC28514 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Quiescent Current | 4mA |
| Input Voltage (Min) | 10.8V |
| Output Current-Max | 3.5A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 100μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28514DW Overview
There is a 20-SOIC (0.295, 7.50mm Width) package that comes with it.There is a Tube package for this product.There is a Surface Mount mounting type for the device.9.7V~18V should supply the voltage to it.Device -40°C~105°C operates at -40°C~105°C.Other IC types, such as POWER FACTOR CONTROLLER WITH POST REGULATOR, are present in the part.The gadget has a number of 20 terminals on the back of it.Current startup state is 100μA.Pin number 20 remains the same for the component.There is a number of UCC28514 in the device's best part.Switching frequency 200kHz is what determines the switching frequency.There are 20 pins in this board, which make up its sum.The system can operate with a minimum input voltage of 10.8V.I guess you could say it's a subclass of Switching Regulator or Controllers in a way.There is a voltage (Max) input to this device.As long as the frequency is kept constant at 500kHz, it is possible to continue to operate with good accuracy.In terms of output current, it works at the maximum in 3.5AIt is powered by a 12V-volt supply at all times.Several 2 outputs exist.In addition to the features mentioned above, PEAK CURRENT MODE ALSO AVAILABLE is another one that is worth mentioning.
UCC28514DW Features
UCC28514DW Applications
There are a lot of Texas Instruments UCC28514DW PFC PMICs applications.
- Subsequent
- Body control modules
- Ultrasound
- DSP power
- Motorcycle
- Automotive applications
- Game machines
- Hot swap controller
- Car eCall
- Analog control systems
