UCC28517DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PEAK CURRENT MODE ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 9.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 500kHz |
| Base Part Number | UCC28517 |
| Pin Count | 20 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Quiescent Current | 4mA |
| Input Voltage (Min) | 10.8V |
| Output Current-Max | 3.5A |
| Frequency - Switching | 200kHz |
| Input Voltage (Max) | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Average Current |
| Current - Startup | 100μA |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28517DW Overview
The package is 20-SOIC (0.295, 7.50mm Width)-shaped.The package is Tube-shaped.Depending on the device, the mounting type will either be Surface Mount or C.In order to operate it, it should be connected to the voltage supply of 9.7V~18V.Currently, the device is set to operate at a frequency of -40°C~105°C.There are also other types of ICs in the part, such as the POWER FACTOR CONTROLLER WITH POST REGULATOR type.An array of 20 terminals is located on the gadget.Currently, the startup current is 100μA.There is no change to the pin number of the component.One of the device's best parts is that it has a number of UCC28517 on it.There is a frequency of switching called 200kHz.20 pins form a sum.Depending on the input voltage, it can operate at a minimum of 10.8V volts.As a kind of subclass of Switching Regulator or Controllers, it can be seen as a kind of subclass of Switching Regulator or Controllers.There is a voltage (Max) input to this device.A frequency of 500kHz allows it to continue operating with a good level of accuracy.As a result, it works in a 3.5A output current at the maximumPower for the component is always provided by a 12V volt supply.A 2 output can take many forms, depending on the application.Among the other features that are available are PEAK CURRENT MODE ALSO AVAILABLE, to name just a few.
UCC28517DW Features
UCC28517DW Applications
There are a lot of Texas Instruments UCC28517DW PFC PMICs applications.
- SMPS (Switching-Mode Power Supply)
- Digital audio player
- UPS (Uninterruptible Power Supply )
- 4WD transfercase
- Position detection
- Fans
- xEV
- Semi-automation
- Industrial equipment
- RF (Radio Frequency)
