UCC28600D
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 650mW |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 8V~21V |
| Control Features | Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 40kHz~130kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 21V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 99 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 13V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power (Watts) | 200W |
| Additional Feature | RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 130kHz |
| Base Part Number | UCC28600 |
| Pin Count | 8 |
| Input Voltage-Nom | 15V |
UCC28600D Overview
It is embedded in package 8-SOIC (0.154, 3.90mm Width) .Tube case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~105°C TA degrees Celsius.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.At this point, the switching frequency reaches 40kHz~130kHz .This AC/DC converter is designed for use within the range of 8V~21V supply voltage (Vcc/Vdd).In total, there are 8 terminations.The ac/dc converter has 8 pins.A total of 8 pins are present on the ac-dc converter.It is possible to search for similar acdc converters by using the UCC28600 family.Switching Regulator or Controllers contains the ac to dc conversions.There is 800mA output current set.A high efficiency is achieved when operating at a frequency of 130kHz .You are able to read the REACH SVHC standard at: No SVHC .Additionally, RESONANT CONTROL TECHNIQUE IS ALSO AVAILABLE can be discovered using this ACDC converter.You should always set this AC to DC converter to 15V .Currently, there are 1 channels available.
UCC28600D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 40kHz~130kHz
With 8 pins
Output Current at 800mA
With 1 channels on it
UCC28600D Applications
There are a lot of Texas Instruments UCC28600D AC DC Converters applications.
- AC--DC Adapter
- White goods
- Z-Wave
- Power adapters for network devices
- Standby Power Supplies
- Standby Power Supplies
- Adapter/Charger for Cordless Phones
- Replacements for bulky plug-in transformers
- Set Top Boxes (STB)
- Small off-line low voltage power supplies
