banner_page

UCC28610D

8 Terminations8V~25V 8 Pin UCC28610 AC to DC power converter1 Outputs30kHz~133kHz


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC28610D
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 881
  • Description: 8 Terminations8V~25V 8 Pin UCC28610 AC to DC power converter1 Outputs30kHz~133kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Switching Regulator or Controllers
Max Power Dissipation 65W
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 12V
Frequency 130kHz
Base Part Number UCC28610
Number of Outputs 1
Output Voltage 12V
Output Type Adjustable
Supply Voltage-Min (Vsup) 9V
Number of Channels 1
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 3mA
Nominal Supply Current 3mA
Power Dissipation 606mW
Output Current 3.6A
Voltage - Supply (Vcc/Vdd) 8V~25V
Output Power 65W
Topology Flyback
Min Input Voltage 9V
Control Mode VOLTAGE-MODE
Frequency - Switching 30kHz~133kHz
Max Input Voltage 20V
Dropout Voltage 2V
Nominal Input Voltage 20V
Internal Switch(s) No
Fault Protection Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle 2 %
Output Isolation Isolated
Voltage - Start Up 10.2V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Lead Free

UCC28610D Overview


In the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.The switching frequency reaches 30kHz~133kHz .Within the range of 8V~25V supply voltage (Vcc/Vdd), it can be used.A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.The UCC28610 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 3.6A .Its output voltage is12V .AC to DC converter reaches high efficiency when operated at a frequency of 130kHz .It is possible to read the REACH SVHC standard at: No SVHC .Under 20V , it is possible to power the AC to DC converter's input voltage.In the AC to DC transformer of a coverter, the output power is 65W .The AC to DC inverter can be used with an input voltage of less than 9V V.Keep in mind that this AC to DC converter should always be set to 12V .In total, there are 1 channels.There is a Adjustable output configured.

UCC28610D Features


Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 30kHz~133kHz
With 8 pins
Output Current at 3.6A
With 1 channels on it
Output Type : Adjustable

UCC28610D Applications


There are a lot of Texas Instruments UCC28610D AC DC Converters applications.

  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • USB-PD 2.0
  • Battery Chargers
  • Battery chargers for cordless
  • Adapter/Charger for Cordless Phones
  • AC?DC USB chargers for Cell Phones
  • Replaces linear transformers
  • Chargers for cell/cordless phones
  • Vacuum Cleaner
  • Laptops

Write a review

Note: HTML is not translated!
    Bad           Good