Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
65W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
12V |
Terminal Pitch |
2.54mm |
Frequency |
130kHz |
Base Part Number |
UCC28610 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
12V |
Output Type |
Adjustable |
Supply Voltage-Min (Vsup) |
9V |
Number of Channels |
1 |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
3mA |
Nominal Supply Current |
3mA |
Power Dissipation |
909mW |
Output Current |
3.6A |
Voltage - Supply (Vcc/Vdd) |
8V~25V |
Output Power |
65W |
Topology |
Flyback |
Min Input Voltage |
9V |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
30kHz~133kHz |
Max Input Voltage |
20V |
Dropout Voltage |
2V |
Nominal Input Voltage |
20V |
Internal Switch(s) |
No |
Fault Protection |
Current Limiting, Over Temperature, Over Voltage |
Max Duty Cycle |
2 % |
Input Current |
10mA |
Output Isolation |
Isolated |
Voltage - Start Up |
10.2V |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UCC28610P Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .When the switching frequency reaches 30kHz~133kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8V~25V .A total of 8 terminations have been recorded.In this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .It is possible to search for similar acdc converters by using the UCC28610 family.A total of 1 outputs are available for processing.The ac to dc conversions can be found in Switching Regulator or Controllers .The output current is set to 3.6A .This AC/DC converter produces a voltage of 12V as its output.High efficiency can be achieved when AC to DC converters frequency is set to 130kHz .You may read the REACH SVHC standard at No SVHC .It is available to power the AC to DC converter input voltage under 20V .A coverter produces 65W watts of output power.A voltage of less than 9V V can be used with the AC to DC inverter.This AC to DC converter should always be set to 12V .A total of 1 channels exist.It uses Adjustable as an output.
UCC28610P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 30kHz~133kHz
With 8 pins
Output Current at 3.6A
With 1 channels on it
Output Type : Adjustable
UCC28610P Applications
There are a lot of Texas Instruments UCC28610P AC DC Converters applications.
- Portable Apparatus
- Universal input AC/DC adapters (15W - 45W)
- White goods
- Battery Chargers
- Power adapters for monitors
- Laptops and personal digital assistants
- Battery Chargers
- Standby Power for General Off-Line Applications
- Air conditioners
- Set Top Boxes (STB)