UCC28700DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 20W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Terminal Pitch | 0.95mm |
| Frequency | 130kHz |
| Base Part Number | UCC28700 |
| Number of Outputs | 1 |
| Output Voltage | 14V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.65mA |
| Nominal Supply Current | 2.1mA |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 9V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1kHz~130kHz |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 35V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 99 % |
| Duty Cycle | 99 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 21V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28700DBVT Overview
There is a ac to dc converter embedded in package SOT-23-6 .The ac dc converter is available in Cut Tape (CT) case.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -20°C~125°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.The switching frequency reaches 1kHz~130kHz .A range of 9V~35V supply voltages (Vcc/Vdd) can be used.In total, there are 6 terminations.In this ac/dc converter, there are 6 pins.Suitable mounting is provided by Surface Mount .A similar acdc converter can be searched by using the UCC28700 family.AC to DC converter is necessary to run 1 outputs.AC to DC converter is contained in Switching Regulator or Controllers .25mA is set as the output current.As a result, its output voltage is 14V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 130kHz .This is the standard of REACH SVHC : No SVHC .This AC to DC converter should always be set to 25V .
UCC28700DBVT Features
Packaged with SOT-23-6
Switching Frequency at 1kHz~130kHz
With 6 pins
Output Current at 25mA
UCC28700DBVT Applications
There are a lot of Texas Instruments UCC28700DBVT AC DC Converters applications.
- ATX/BTX Auxiliary Power
- Remotely-controlled appliances
- Low-Voltage I/O System Power
- Home appliances
- Charger
- Z-Wave
- Battery Chargers
- Appliances
- Portable Apparatus
- AC/DC Adaptors/Chargers for PDAs
