UCC28701DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Digi-Reel® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Terminal Pitch | 0.95mm |
| Frequency | 130kHz |
| Base Part Number | UCC28701 |
| Number of Outputs | 1 |
| Output Voltage | 14V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.65mA |
| Nominal Supply Current | 2.1mA |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 9V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1kHz~130kHz |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 35V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 99 % |
| Duty Cycle | 99 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 21V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28701DBVT Overview
This ac to dc converter is included in the package SOT-23-6 .The ac dc converter is available in Digi-Reel? case.Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -20°C~125°C TJ °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.The switching frequency reaches 1kHz~130kHz .Vcc/Vdd can be used within the range of 9V~35V supply voltage.In total, it has 6 terminations.There are 6 pins on this ac/dc converter.The ac dc converters are suitable to mount by Surface Mount .The UCC28701 family can be used to search for similar acdc converters.There are 1 outputs to be run.The following ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 25mA for the output current.There is 14V voltage output from it.AC to DC converter is able to reach high efficiency when its frequency is 130kHz .This is the standard of REACH SVHC : No SVHC .This AC to DC converter should always be set to 25V .
UCC28701DBVT Features
Packaged with SOT-23-6
Switching Frequency at 1kHz~130kHz
With 6 pins
Output Current at 25mA
UCC28701DBVT Applications
There are a lot of Texas Instruments UCC28701DBVT AC DC Converters applications.
- SMPS house keeping power supplies
- AC/DC LED Driver applications
- Battery chargers for mobile devices with touchpad display
- AC/DC Adaptors/Chargers for Cell Phones
- Consumer electronics
- Cleaners
- Rice Cooker
- Standby power supplies for VCR
- Automotive Clusters
- Power adapters for monitors
