UCC28703DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 20W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Terminal Pitch | 0.95mm |
| Frequency | 130kHz |
| Base Part Number | UCC28703 |
| Number of Outputs | 1 |
| Output Voltage | 14V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2.1mA |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 9V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1kHz~130kHz |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 25V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 99 % |
| Duty Cycle | 99 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 21V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28703DBVT Overview
It is embedded in package SOT-23-6 .The AC/DC power converter is available in Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -20°C~125°C TJ degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.At this point, the switching frequency reaches 1kHz~130kHz .The AC/DC converter is capable of being used when the supply voltage is 9V~35V (Vcc/Vdd).There are a total of 6 terminations in it.The ac/dc converter has a total of 6 pins.The ac dc converters are suitable to mount by Surface Mount .You can search similar acdc converters based on UCC28703 family.There are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .AC to DC converter is set to 25mA for the output current.There is 14V output voltage from this AC/DC converter.High efficiency can be achieved when AC to DC converters frequency is set to 130kHz .You are able to read the REACH SVHC standard at: No SVHC .Ensure that this AC to DC converter is always set to 25V .
UCC28703DBVT Features
Packaged with SOT-23-6
Switching Frequency at 1kHz~130kHz
With 6 pins
Output Current at 25mA
UCC28703DBVT Applications
There are a lot of Texas Instruments UCC28703DBVT AC DC Converters applications.
- MPS parts
- Chargers for cell/cordless phones
- AC?DC USB chargers for Tablets
- Adapter/Charger for Cordless Phones
- Standby and Auxiliary Power Supplies
- USB type-c v1.2 chargers with optional VDM
- Linear Adapter Replacements
- Adapters for Handheld Electronics
- Standby Power Supplies
- Low-Voltage I/O System Power
