UCC28710D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Weight | 254.011727mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Frequency | 680Hz |
| Base Part Number | UCC28710 |
| Number of Outputs | 1 |
| Output Voltage | 14V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 9V~35V |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 680Hz~100kHz |
| Input Voltage (Max) | 35V |
| Control Technique | FREQUENCY MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 42.5 % |
| Duty Cycle | 99 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 21V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28710D Overview
In the package 8-SOIC (0.154, 3.90mm Width), 7 Leads , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.Surface Mount mounts this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.In this AC to DC transformer, the switching frequency is 680Hz~100kHz .Vcc/Vdd can be used within the range of 9V~35V supply voltage.In total, there are 7 terminations.The ac/dc converter has a total of 7 pins.It are possible to mount thare ac dc converters by Surface Mount .If you select the UCC28710 family, you will be able to search for similar acdc converters.The number of outputs to run is 1 .Switching Regulator or Controllers contains the ac to dc conversions.Currently, the output current is set to 25mA .The voltage output by this AC/DC converter is 14V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 680Hz .Unique techniques can be used to ensure input voltage at the maximum value of 35V .You can read the standard of REACH SVHC : No SVHC .Using this ACDC converter, it is also possible to identify ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE .Remember that this AC to DC converter should be set to 25V at all times.
UCC28710D Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 680Hz~100kHz
With 7 pins
Output Current at 25mA
UCC28710D Applications
There are a lot of Texas Instruments UCC28710D AC DC Converters applications.
- Auxiliary Power Supply
- Battery chargers for mobile devices with touchpad display
- Adapter/Charger for Cordless Phones
- MPS parts
- Battery Chargers
- Standby Power Supplies
- Off--line Battery Charger
- RCC SMPS
- Power adapters for network devices
- Handheld/Battery-Powered Systems
