banner_page

UCC28711D

7 Terminations9V~35V 7 Pin UCC28711 AC to DC power converter1 Outputs680Hz~100kHz


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC28711D
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 542
  • Description: 7 Terminations9V~35V 7 Pin UCC28711 AC to DC power converter1 Outputs680Hz~100kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Number of Pins 7
Weight 254.011727mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE
Subcategory Switching Regulator or Controllers
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 25V
Frequency 680Hz
Base Part Number UCC28711
Number of Outputs 1
Output Voltage 14V
Input Voltage-Nom 25V
Analog IC - Other Type SWITCHING CONTROLLER
Operating Supply Current 2mA
Output Current 25mA
Voltage - Supply (Vcc/Vdd) 9V~35V
Topology Flyback
Control Mode CURRENT/VOLTAGE-MODE
Frequency - Switching 680Hz~100kHz
Control Technique FREQUENCY MODULATION
Nominal Input Voltage 25V
Switcher Configuration SINGLE
Internal Switch(s) No
Fault Protection Current Limiting, Over Voltage
Max Duty Cycle 42.5 %
Duty Cycle 99 %
Output Isolation Isolated
Voltage - Start Up 21V
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC28711D Overview


This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .Tube case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ in order to ensure its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.In this AC to DC transformer, the switching frequency is 680Hz~100kHz .Vcc/Vdd can be used within the range of 9V~35V supply voltage.A total of 7 terminations have been recorded.In this ac/dc converter, there are 7 pins.The ac dc converters are suitable to mount by Surface Mount .It is possible to search for similar acdc converters by using the UCC28711 family.A total of 1 outputs need to be run.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 25mA .In this AC to DC transformer, the output voltage is 14V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 680Hz .SVHC for REACH can be found in the standard No SVHC .Using this ACDC converter, ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE is also accessible.You should always set this AC to DC converter to 25V .

UCC28711D Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 680Hz~100kHz
With 7 pins
Output Current at 25mA

UCC28711D Applications


There are a lot of Texas Instruments UCC28711D AC DC Converters applications.

  • USB-PD 2.0
  • PDAs
  • Standby power supplies for IR
  • IoT Applications
  • Tablets
  • Appliances
  • Standby Power Supplies
  • Standby and Auxiliary Power Supplies
  • Low-Voltage I/O System Power
  • Cleaners

Write a review

Note: HTML is not translated!
    Bad           Good