UCC28713D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Weight | 254.011727mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | UCC28713 |
| Number of Outputs | 1 |
| Output Voltage | 14V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 9V~35V |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 680Hz~100kHz |
| Input Voltage (Max) | 35V |
| Control Technique | FREQUENCY MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 42.5 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 21V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28713D Overview
In the 8-SOIC (0.154, 3.90mm Width), 7 Leads package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.As a result, the switching frequency reaches 680Hz~100kHz .Supply voltage (Vcc/Vdd) does not need to exceed 9V~35V .In total, there are 7 terminations.Approximately 7 pins are present on the ac/dc converter.Surface Mount is the recommended mounting method for the ac dc converters.If you select the UCC28713 family, you will be able to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.AC to DC converter is contained in Switching Regulator or Controllers .We have set the output current to 25mA .There is 14V voltage output from it.On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 35V .You may read the REACH SVHC standard at No SVHC .In addition to ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE , this ACDC converter can also be used to determine ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE .This AC to DC converter should always be set to 25V .
UCC28713D Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 680Hz~100kHz
With 7 pins
Output Current at 25mA
UCC28713D Applications
There are a lot of Texas Instruments UCC28713D AC DC Converters applications.
- AC/DC LED Driver applications
- Dimmers
- Battery chargers for cordless
- Power Adaptors
- AC/DC Adaptors/Chargers for Cell Phones
- Cleaners
- Low power ac?dc Adapters for Chargers
- MP3
- Automotive Infotainment
- Replacements for bulky plug-in transformers
