UCC28713DR
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | UCC28713 |
| Output Voltage | 14V |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 25V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 9V~35V |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 680Hz~100kHz |
| Control Technique | FREQUENCY MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Start Up | 21V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
UCC28713DR Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The AC/DC power converter type is Tape & Reel (TR) .Surface Mount mounts this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.Switching frequency reaches 680Hz~100kHz Hz.A range of 9V~35V supply voltages (Vcc/Vdd) can be used.As a result, it has had 7 terminations.There are 7 pins on this ac/dc converter.It are possible to mount thare ac dc converters by Surface Mount .If you select the UCC28713 family, you will be able to search similar acdc converters.AC to DC converter is contained in Switching Regulator or Controllers .25mA is set as the output current.The voltage output by this AC/DC converter is 14V .Using this ACDC converter, ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE is also accessible.Interface ICs conduct when the supply voltage is 35V .Ensure that this AC to DC converter is always set to 25V .
UCC28713DR Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 680Hz~100kHz
With 7 pins
Output Current at 25mA
Operating Supply Voltage at the range of 35V
UCC28713DR Applications
There are a lot of Texas Instruments UCC28713DR AC DC Converters applications.
- MP3
- Low power ac?dc Adapters for Chargers
- Appliances
- Adaptors for Portable Media Player
- Wall switches
- Automotive Clusters
- AC/DC Adaptors/Chargers for PDAs
- Battery chargers for media tablets
- Dimmers
- PDAs
