UCC28810DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 250kHz |
| Base Part Number | UCC28810 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 400V |
| Operating Supply Voltage | 15V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 13V |
| Nominal Supply Current | 7mA |
| Output Current | 5A |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Topology | Flyback, SEPIC, Step-Down (Buck), Step-Up (Boost) |
| Min Input Voltage | 13V |
| Max Input Voltage | 18V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 750mA |
| Internal Switch(s) | Yes |
| Dimming | Triac |
| Number of Segments | 1 |
| Switching Frequency | 250kHz |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28810DR Overview
Using its 8-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. LED drivers use 1 outputs for their design.As far as mounting is concerned, Surface Mount is adopted.With high efficiency, it appears as a AC DC Offline Switcher.The led light driver is capable of working normally at -40°C~105°C TA.It provides considerable benefits for Lighting.This system operates at 250kHz frequency.8 terminations are designed for its operation.The LED light driver has a base configuration of 8 pins.A total of 1 segments are estimated.The LED driver is based on part number UCC28810.Ideally, the supply voltage should be 18V.8 pins are used on the device.The input voltage must be minimally 13V.For highest efficiency, it works with a minimal supply voltage of 13V.In terms of supply current, there is a maximum value of 18V.When the maximum supply current is less than 6mA, this device is capable of providing high efficiency.It is possible to supply the load with 5A current.It is necessary to have 15V voltages inside systems to power them.The electronic component can fully perform its functions if the switching frequency is maintained at 250kHz.No external factors cause 4mA current to be consumed.This device produces a voltage of 400V as its output.
UCC28810DR Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~105°C TA
Frequency of 250kHz
Supply voltage of 12V
Operating with the supply voltage of 15V
Switching frequency of 250kHz
Output voltage of 400V
UCC28810DR Applications
There are a lot of Texas Instruments UCC28810DR LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Portable lighting
- Stage and Studio lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Dimmable LED for vehicle interiors
- Flicker-free LED Lighting using R1580N
- Museum lighting
- LED headlights
