UCC28811D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 250kHz |
| Base Part Number | UCC28811 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 15V |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 13V |
| Nominal Supply Current | 7mA |
| Power Dissipation | 150W |
| Output Current | 750mA |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Topology | Flyback, Step-Down (Buck), Step-Up (Boost) |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 18V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | No |
| Dimming | Triac |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28811D Overview
To save space on the board, it has a 8-SOIC (0.154, 3.90mm Width) package. 1 outputs are designed into LED drivers.Surface Mount is used for mounting.In this case, the AC DC Offline Switcher emerges as highly efficient and reliable.-40°C~105°C TA is the operating temperature of the led driver.The benefits of Lighting are considerable.Frequency 250kHz is the basis of operation.In this case, the termination value is 8.There are 8 pins on its base.In total, it includes 1 segments.LED drivers have a base part number of UCC28811.It is acceptable for the supply voltage to be 18V.In this device, there are 8 pins.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 13V.In terms of supply current, 18V is the maximum value.If the maximum supply current is less than 6mA, the device is capable of providing high efficiency.There is no current available to supply to the load.Powering systems requires 15V voltages.There is no external factor that consumes current when there is 4mA current consumption.
UCC28811D Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~105°C TA
Frequency of 250kHz
Supply voltage of 12V
Operating with the supply voltage of 15V
UCC28811D Applications
There are a lot of Texas Instruments UCC28811D LED Driver ICs applications.
- Stage and Studio lighting
- Flicker-free LED Lighting using R1580N
- Street lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Architectural lighting
- Museum lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
