UCC2888D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | UCC2888 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6V~9.3V |
| Input Voltage (Min) | 6.6V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Rise Time | 35ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Short Circuit |
| Max Duty Cycle | 55 % |
| Switching Frequency | 250kHz |
| Duty Cycle | 7.6% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 8.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2888D Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width) .The AC/DC power converter is available in Tube .As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~85°C TA °C.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 6V~9.3V .There are a total of 8 terminations in it.The ac/dc converter has 8 pins.In this ac-dc converter, there are 8 pins.The ac dc converters are suitable to mount by Surface Mount .If you select the UCC2888 family, you will be able to search similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .The output current is set to 200mA .There is 5V output voltage from this AC/DC converter.When the supply voltage is 9V , the interface IC conducts.
UCC2888D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 200mA
Operating Supply Voltage at the range of 9V
UCC2888D Applications
There are a lot of Texas Instruments UCC2888D AC DC Converters applications.
- Power Adaptors
- Battery chargers for media tablets
- Tablets
- Power adapters for network devices
- WiFi Wireless
- Power adapters for monitors
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Appliances
- Off--line Battery Charger
- Smartphones
