UCC2889DTRG4
| Parameters | |
|---|---|
| Fault Protection | Short Circuit |
| Max Duty Cycle | 55 % |
| Switching Frequency | 250kHz |
| Duty Cycle | 55 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 8.4V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 250kHz |
| Base Part Number | UCC2889 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 17.5V |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 1.2mA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~9.3V |
| Input Voltage (Min) | 6.6V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 9.3V |
| Rise Time | 35ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
UCC2889DTRG4 Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width) .In Tape & Reel (TR) AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~85°C TA °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Within the range of 6.3V~9.3V supply voltage (Vcc/Vdd), it can be used.There are a total of 8 terminations in it.The ac/dc converter has a total of 8 pins.There are 8 pins on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.It is possible to search for similar acdc converters by using the UCC2889 family.There are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 100mA .It produces a voltage of 17.5V .AC to DC converter reaches high efficiency when operated at a frequency of 250kHz .Using a unique technique, a voltage with a maximum value of 9.3V can be ensured.When the supply voltage is 9V , the interface IC conducts.
UCC2889DTRG4 Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 100mA
Operating Supply Voltage at the range of 9V
UCC2889DTRG4 Applications
There are a lot of Texas Instruments UCC2889DTRG4 AC DC Converters applications.
- Standby power supplies for VCR
- SMPS house keeping power supplies
- Open Frame Switching Power Supply
- Cleaners
- Appliances
- Home appliances
- Universal Off-Line Power Supplies
- Tablets
- Adapter/Charger for Cordless Phones
- Wall switches
