UCC28911D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 7 |
| Power Rating | 10W |
| Max Power Dissipation | 12W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | UCC28911 |
| Number of Outputs | 1 |
| Efficiency | 75 % |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 1.26A |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 6.5V~30V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 420Hz~115kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 9.5V |
| Min Input Voltage (AC) | 90V |
| Max Input Voltage (AC) | 265V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
UCC28911D Overview
8-SOIC (0.154, 3.90mm Width), 7 Leads is the package in which the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.There is 420Hz~115kHz switching frequency.This AC/DC converter is designed for use within the range of 6.5V~30V supply voltage (Vcc/Vdd).In total, it has 7 terminations.In this ac/dc converter, there are 7 pins.Surface Mount is the recommended mounting method for the ac dc converters.Based on the UCC28911 family, you can search for similar acdc converters.Running 1 outputs is available.There is 5V voltage output from it.You may read the REACH SVHC standard at No SVHC .It is available to power the AC to DC converter input voltage under 265V .The AC to DC inverter may be operated with an input voltage less than 85V volts.AC to DC power converters should be able to accept input voltages (AC) below 265V .It uses Fixed as an output.
UCC28911D Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 420Hz~115kHz
With 7 pins
Output Type : Fixed
UCC28911D Applications
There are a lot of Texas Instruments UCC28911D AC DC Converters applications.
- White goods
- AC-DC Output Power Conversion Applications
- Adapters for Handheld Electronics
- Utility meters
- Shaver Charger
- USB-PD 2.0
- Standby power supplies for VCR
- Chargers for cell/cordless phones
- Switching AC-DC Charger
- Off--line Battery Charger
