UCC2892D

16 Terminals 8.5V~16V 16-Pin UCC2892 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2892D
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 142
Description: 16 Terminals 8.5V~16V 16-Pin UCC2892 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UCC2892
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	900mV
Output Type	Transistor Driver
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	2A
Voltage - Supply (Vcc/Vdd)	8.5V~16V
Quiescent Current	2mA
Control Features	Current Limit, Enable, On Time Control, Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	250kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	19ns
Supply Current-Max (Isup)	3mA
Synchronous Rectifier	No
Fall Time (Typ)	14 ns
Nominal Input Voltage	110V
Switcher Configuration	SINGLE
Max Duty Cycle	73 %
Duty Cycle (Max)	70%
Clock Sync	Yes
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2892D Overview

It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 8.5V~16V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 250kHz . dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, On Time Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . 16 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "UCC2892". There are a total of 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 900mV. You should note that the dc dc regulator's usual output current is 2A. The maximum duty cycle of this voltage regulator dc to dc is set to 73 % to ensure reliability during power-up and power-down. Switching controller operates at a frequency of 1MHz. It is suggested that users apply 12V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. When the dc switching is dormant, it uses 2mA. A nominal working status is achieved when the input voltage is set to 110V. The supply voltage must be 12V. It is important that the controller is supplied with 3mA more than 3mA volts of current.

UCC2892D Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz