UCC2892PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2892 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 11.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Quiescent Current | 2mA |
| Control Features | Current Limit, Enable, On Time Control, Ramp, Soft Start |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 19ns |
| Supply Current-Max (Isup) | 3mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 14 ns |
| Nominal Input Voltage | 110V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 73 % |
| Duty Cycle (Max) | 70% |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2892PW Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 8.5V~16V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 250kHz position. The Surface Mount allows it to be used for dc dc regulator in general. Current Limit, Enable, On Time Control, Ramp, Soft Start provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. A search for "UCC2892" will reveal other relevant dc to dc converter ics. Pins number 16 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 11.1V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 150mA. Voltage regulator dc to dc is designed to operate at 73 % duty cycle during power-ups and power-downs to ensure reliability. The switching controller works at a frequency of 1MHz. It is suggested that users apply 12V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. Dormant dc switchings use 2mA. 110V is the nominal working voltage. The supply voltage should be 12V. It is important that the controller is supplied with 3mA more than 3mA volts of current.
UCC2892PW Features
Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz
UCC2892PW Applications
There are a lot of Texas Instruments UCC2892PW DC to DC converter applications.
- Linear guide
- Ball screw pair
- Radio equipment
- Automatic plug-in machines
- Constant current circuits
- Adjustable voltage or current linear circuits
- Solar power plants
- Wide-range voltage regulation circuits
- Motor controller circuits
- Injection molding machinery
