UCC2893D

16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2893D
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 717
Description: 16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver (Kg)

Details

Tags

Parameters
Fall Time (Typ)	14 ns
Nominal Input Voltage	110V
Switcher Configuration	SINGLE
Max Duty Cycle	73 %
Duty Cycle (Max)	70%
Clock Sync	Yes
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UCC2893
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	11.1V
Output Type	Transistor Driver
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	150mA
Voltage - Supply (Vcc/Vdd)	8.5V~16V
Quiescent Current	2mA
Control Features	Current Limit, Enable, On Time Control, Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	250kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	19ns
Supply Current-Max (Isup)	3mA
Synchronous Rectifier	No

UCC2893D Overview

The switching controller fits in the 16-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 8.5V~16V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 250kHz position. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, On Time Control, Ramp, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Search for "UCC2893" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 11.1V. normally, the dc dc regulator's output current is 150mA, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 73 % on power-up or power-down to ensure reliability. A frequency of 1MHz is set for the switching controller. Users should apply 12V to operate the voltage regulator dc to dc safely and reliably. DC switching uses 2mA when it is dormant. 110V is the nominal working voltage. Voltage 12V is required for supply. There should be 3mA more than 3mA amps of current supplied to the controller.

UCC2893D Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz