UCC2893DR

16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2893DR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 298
Description: 16 Terminals 8.5V~16V 16-Pin UCC2893 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 250kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Frequency	1MHz
Base Part Number	UCC2893
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	11.1V
Output Type	Transistor Driver
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	150mA
Voltage - Supply (Vcc/Vdd)	8.5V~16V
Control Features	Current Limit, Enable, On Time Control, Ramp, Soft Start
Topology	Flyback, Forward Converter
Control Mode	CURRENT-MODE
Frequency - Switching	250kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	19ns
Supply Current-Max (Isup)	3mA
Synchronous Rectifier	No
Fall Time (Typ)	14 ns
Nominal Input Voltage	110V
Switcher Configuration	SINGLE
Max Duty Cycle	73 %
Duty Cycle (Max)	70%
Clock Sync	Yes
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2893DR Overview

Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). 8.5V~16V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 250kHz position. Surface Mount makes it suitable for general dc dc regulator. Current Limit, Enable, On Time Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. UCC2893 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter type is specifically Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 11.1V voltage. normally, the dc dc regulator's output current is 150mA, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 73 % to ensure reliability during power-up and power-down. A frequency of 1MHz is used by the switching controller. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. 110V is the nominal working voltage. Switching controller is necessary to supply a voltage of 12V. There should be 3mA more than 3mA amps of current supplied to the controller.

UCC2893DR Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, On Time Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 73 %
Frequency: 1MHz